Home > Solved Windows > Solved: Windows XP Sees All FAT32 As Unformatted

Solved: Windows XP Sees All FAT32 As Unformatted

raj says: 8 years ago an external harddrive formatted to fat32 will let you put files on there which are 4gb or less. You can read my previous post on how to format an external hard drive using FAT32. Advertisement ron5657 Thread Starter Joined: Feb 20, 2008 Messages: 14 I have first physical drive with 2 FAT32 (C:, E and 1 NTFS partition (M . It works well with hardware RAID and hard drives, SD and Memory Cards, etc. http://realink.org/solved-windows/solved-windows-2k-makes-all-windows-xp-machines-see-internet-gateway-in-network-connections.html

Go to start menu and click up "Run" 2. It is straightforward. If not, post a comment and I'll try to help. Comment only on the article. https://forums.techguy.org/threads/solved-windows-xp-sees-all-fat32-as-unformatted.685328/

Anything else I can do to format in FAT32? The right start sector is 63. Took only a couple of mins. So try out several cables before you give up.

Patreon FAQ Ask Leo! When opening SwissKnife V3 right click on it and run as administrator. Please click 'Yes' button to solve this problem. If you need support for bigger files, then you should use the exFAT format.

Membership FAQ Best Articles Best Articles: a Collection 50 Most Recent All Entries (by date) Ask Leo! Proceed with Format (Y/N)? Tried to format 60 GB (not 1 TB) and still got the "The volume is too big for FAT32." Start with SwissKnife instead. go to http://tokiwa.qee.jp/EN/Fat32Formatter/index.html download the formatter (its a really small file anyways) Plug in your hardrive. (take off any files on your hardrive and save them to something else (computer or

All is well 🙂 hakan says: 7 years ago Dos says: hard drive is too big (Which is really dumb since it tells me after waiting for an hour) Swissknife keeps says: 7 years ago Tried using the DOS option to format a 500GB Western Digital Elements Portable. Kalpesh says: 8 years ago Hi All, This REALLY works. JR says: 7 years ago I wound up using the following link.

Right click on the partition without a drive letter and select "Change drive letter and paths…" From there click "Add", then choose the desired drive letter and click OK. http://www.sevenforums.com/general-discussion/49873-flash-drive-suddenly-shows-unformatted-win-7-a.html Also, I don't know of any other softwares fit for the job… or what to do again?. After a few reboots (and reading some... is licensed under aCreative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.Additional information is available athttps://askleo.com/creative-commons-license/.Terms Ads vs.

Join our site today to ask your question. get redirected here Works like a charm. This works in Vista, I'm assuming it's valid for legacy versions too. :-)) Lydie says: 8 years ago Oh and BTW. Bill says: 7 years ago I tried using Swissknife but it wouldn't do 1tb, tried a few others but finally found :- Easeus Partition Master Home Edition 5.0.1 at download.com It

I must add though that my disc was previously an NTFS fromatted disc - does this make a difference? This is usually a problem with drivers or hardware. not being found I was able to resolve by following the advise on another thread about turning off IDE bus mastering/ Ultra DMA in the BIOS. navigate to this website Ian says: 7 years ago FINALLY!!!!!!!!!!

Erika says: 7 years ago before I used #18, my drive was F:, I only can see my HDD info from Disk Management, File System RAW, after I used 18#, I If it is, then: You have access to your data (back it up!). I have had to back up my data off my PS3 as it is borked.

Once this is done you can open up SwissKnife and format it with no problems.

I've got exactly the same "drive unformatted" problem again this morning as I did yesterday morning! USB Ports/Secondary PC You can also try plugging the drive into another USB port on the computer to make sure it's not a problem with that particular port. Normally, Windows does this automatically, but sometimes because of other connected devices, your external hard drive will be recognized, but not have any drive letter assigned to it. I've checked this drive running a drive checker and there are no problems with it.

More detail sees 'Fixboot'. Thread Status: Not open for further replies. what is it and how to ged rid of it? http://realink.org/solved-windows/solved-windows-xp-reinstall-hangs-on-setup-is-installing-windows.html Praveen says: 7 years ago Thankyou very much!

I really tried to make something (everything, that here is written), but I could not reformat my external hard drive (WD-500 GB) to FAT32. For those who get the "you don't have enough priviledges" rigamarole when you try to format, before you double click the cmd.exe, just right-click the cmd.exe to get to the menu It is in German (instructions!), but the basic instruction is "hformat x:". Reply dimi November 12, 2016 at 3:59 pm if I do this,i will also lose all of my data?

I have attempted to use TestDisk for Windows, but it isn't displaying the correct amount of memory for the drive, the drive is 1 terabyte but only 100 and something Kilobytes So I tried the Tokiwa link in post #18, took awhile, but worked like a charm and I only lost about 640kb of disk space. laysin says: 8 years ago many thanks for your information. carl says: 8 years ago Follow the fat32format link, i will work like a charm.

Seems like I have a busy weekend )-: ron5657, Feb 21, 2008 #3 ron5657 Thread Starter Joined: Feb 20, 2008 Messages: 14 I had quite a weekend (spent two days Jamie says: 7 years ago I was having trouble getting full capacity from my 1tb ext HD, followed the steps in post 43 and it now works perfectly. BUT, I found a solution that ACTUALLY does WORK! One thing though, if you choose the normal format instead of the "fast", then it will take all night.

Any help would be much appreciated. Hard.I had divided it to 3 partitions.I decided to make one of them bootable (by some app) to install Win 7 on my PC.