Home > Solved Will > Solved: Will This Mobo Work With Old Cpu

Solved: Will This Mobo Work With Old Cpu

Rukee, Dec 26, 2005 #14 SacsTC Joined: Dec 30, 2003 Messages: 1,647 Page 6 of the user manual says yes. Report 21suesue- Oct 19, 2014 at 06:04 AM tyvm it worked for me Report TEesA- Oct 20, 2014 at 01:55 PM hi... Advertisement The Troubleshooting Process Troubleshooting your motherboard doesn’t take a lot of work. LGA CPU's are more likely to sit flat and clamp down evenly than the older packages with pins or legs that could easily bind in the socket and hold one side news

Unlike so many other motherboard connectors, which are designed to make improper installation impossible, the power button connector usually is labeled only with plus and minus symbols. An example is the ASUS A7N8X-E Deluxe on which the Supported CPU list starts at 1000Mhz and there's a note somewhere about not using slower CPU's with it. Show Ignored Content Page 1 of 2 1 2 Next > As Seen On Welcome to Tech Support Guy! solved Upgrade CPU+MOBO on 4.5 year old HP system solved CPU upgrade worth it with my MoBo?

You may be tempted to skip forward if you hear beeps, but there's no reason to assume at this point that beeps and the dead screen are the same problem. All rights reserved. Report Bro- Feb 21, 2014 at 09:47 AM OMG its beyond logic but its work, thank you sir. @Slof its the power cord on the cpu. If this does not happen, the problem is that the PC has not booted, so naturally the monitor cannot display anything.

solved HDD question: Will my old HDD work on my new mobo? thank you both for your answers.BadActor - while your name and pic combo offends me (huge Governator fan), I am very impressed with your response. brite750, Dec 26, 2005 #9 brite750 Thread Starter Joined: Mar 16, 2002 Messages: 13,404 Rukee said: the only thing I would buy is a platform upgrade. You can grab a socket 754 combo with memory for under 200 bucks and maybe a power supply for good messure.

Anyone who has ever worn wool socks and Moonwalked across a carpet knows this intimately. solved Possible to transfer CPU from old motherboard to new? In my case, I possibly broke the SATA port housing on the motherboard. Worked for me!

A failure to pass the POST process is the most frequent symptom, but the other situations can occur even if only occasional contact is made between the motherboard and the case. I have immediately gone to a couple of sites and downloaded their compatibly charts/info. Conclusion Fixing motherboard problems only requires three basic steps – first, check your board for signs of physical damage. See more Asus destop computer is not working Pc no signal to monitor and keyboard Desktop pc no display on tv monitor There's power, but no output on monitor and mouse/keyboard,

While you'll rarely see this today, if a PC uses tinned (silver color) contacts against gold contacts, the dissimilar metals can cause corrosion over time due to a constant electrical current https://forums.techguy.org/threads/solved-will-this-mobo-work-with-old-cpu.428064/ Considering the age of the system, I think a new build would be in order. Also, check that all internal wires are properly shielded with a rubber or plastic exterior. Lining these up with the plus and minus printed on the motherboard should be easy, except most motherboards print their labels in hilariously small text.

While memory modules can be popped in and out in a second, the massive heatsinks on today's high power processors are secured to the motherboard with strong spring clips that aren't navigate to this website Get the answer maxiimMar 24, 2014, 8:12 PM The 1366 socket is already a generation and more than a few years old, so there is nothing in common with the "newest Bent CPU pins: Sometimes manufacturers can ship motherboards with bent pins. Return to Diagnostic Chart Does the system freeze when you strip it down to the minimum configuration required to start the boot process?

Will it work? It's also a good time to try known good working RAM from another PC that uses the same technology if you have access to some. Report gonzhi1961- Aug 11, 2014 at 10:00 PM had the same problem with my pc...tried to do everytthing I learned from different forums...but no luck..then I came across this suggestion.."Remove your More about the author sorry I can't be of more help this time.

http://www.thedigerati.us/info/amdcpuchart.html#ath brite750, Dec 26, 2005 #5 brite750 Thread Starter Joined: Mar 16, 2002 Messages: 13,404 http://www.outletpc.com/c3887.html heres another link Athlon 200fsb.......dam its gotta work brite750, Dec 26, 2005 #6 You may run into problems with your Dell branded version of Windows, but that is easily overcome. But my question is...

Thanks :-) Helpful +9 Report Router Nov 25, 2014 at 01:47 AM Worked also for me !!

I know that there are giant limitations with this equipment, but I'm trying to make the best of a what I got.Thanks!-dom 3 answers Last reply Mar 6, 2016 Best Answer Check the action on all motherboard mounted heatsink fans There may be a heatsink fan on the chipset (the Northbridge handles communications between the memory and graphics systems and the CPU Join over 733,556 other people just like you! Some obscure HDD problems can prevent a boot however, and that type of failure could mean a thousand $ or more to recover the data (failed on-drive electronics).

No, create an account now. That's because the motherboard never receives the command to do so if you press the power button when the wire isn't connected to the proper pins on your motherboard. Each and every issue is packed with punishing product reviews, insightful and innovative how-to stories and the illuminating technical articles that enthusiasts crave....https://books.google.com/books/about/Maximum_PC.html?id=ZwIAAAAAMBAJ&utm_source=gb-gplus-shareMaximum PCMy libraryHelpAdvanced Book SearchSubscribeGet Textbooks on Google PlayRent click site Does the PC start the boot process and get at least as far as displaying a message from the BIOS or any signs of life from Windows?

Even new processors that fit into the motherboard’s CPU socket may not be compatible out of the box. Is the PC actually booting (fans running is no guarantee of a successful boot) When you think it should have booted, try the CAPS Lock key, every time you press it The easiest way to be sure is to count the standoffs, count the screws, and make sure there are no screws leftover after you install the motherboard. Note that older system with the CMOS option to boot from a USB memory device were often finicky about it, so it's safer to use an original operating system disc for

Helpful +6 Report Ambucias 39053Posts Monday February 1, 2010Registration date ModeratorStatus March 7, 2017 Last seen Nov 8, 2014 at 04:08 PM I suggest you connect to an external monitor to While CPUs should be able to shut themselves down to prevent thermal self destruction, if you just installed a new CPU and powered the system up with no heatsink at all, Newer Than: Search this thread only Search this forum only Display results as threads Useful Searches Recent Posts More... You can grab a socket 754 combo with memory for under 200 bucks and maybe a power supply for good messure.

If you cannot access the BIOS settings, the diagnostic approach is the same as it would be with a dead screen, and you should review the dead screen steps before proceeding. I prefer to build inside of the case.