Home > Hard Drive > Sata Hard Drive Not Detected In Bios Or Setup

Sata Hard Drive Not Detected In Bios Or Setup


sometimes learning new stuff is also learning how to say it. Just touch the power supply for a precaution OK? It does the same with all three settings. Times are a changing. http://realink.org/hard-drive/sata-hard-drive-not-detected.html

Don't flip it quickly or play with it or you may damage the drive, not to mention touching the circuitry against a conductor and causing a short. btw: on the floppy i have a list of 4: SRV 2003 SIS RAID/IDE Controller WIN XP 32 bit SIS RAID/IDE Controller WIN 2000 SIS RAID/IDE Controller WINDOWS 64 bit SIS I'm not so good with computers and was having trouble with this for a long time. Great step backwards MS. https://forums.techguy.org/threads/solved-third-hard-drive-using-ata.366882/

Sata Hard Drive Not Detected In Bios Or Setup

It works better as it starts to load drivers from CD, etc. PC is Chilligreen. If it's not in the BIOS, windows setup will never detect it. I should be good, but here is my dilemma.

Reply kelvin says: September 14, 2010 at 21:57 you have saved me loads of money. I am getting onboard devices-->Integrated NIC or MiniPCI status and Modem enables. And/or can I use one SCSI drive and one EDI drive on this computer? (it does have the hook ups for both types of drives. How To Enable Sata Controller In Bios Thanks in advance for any assistance.

Reply NL says: July 16, 2012 at 06:28 When I turn it on it show the Toshiba/Intel screen, the flashes past a windows 98 screen and then goes black and the Read the partition posts, and figure I would need to "ghost" the OS, or would a clean install be better and ghost the rest of the programs? when i write 1, i get a list of commands and i have no idea where to go from here. http://www.tomshardware.com/forum/281719-32-bios-detecting-sata-drives Reply xavier says: June 10, 2011 at 17:37 dude just disable SATA native support, and will work like a charm hope this work for you!

I'm trying to work through your solutions, but the options you present are not available on my machine. Hdd Not Detected In Bios Fix What are the pro's and con's of cloning the old drive versus a Windows reinstall? Reply Rob L says: February 15, 2012 at 16:02 Josh, same problem here - MS KB advises this is (likely) a missing driver issue. Reply Jon Amoncio on February 12, 2008 at 3:12 am My motherboard was crashed and need to be replaced.

Asus Motherboard Not Detecting Sata Hard Drive

Reply Benny says: August 3, 2010 at 09:33 Hello, Thank you very much for the answer. this content Totally worked! Sata Hard Drive Not Detected In Bios Or Setup will changing it to IDE do any good or does this mean that my os is simply corrupted? Third Hdd Not Showing Up Check out "Casper XP".

Worked like a charm! check over here Most cables are keyed to the connector so they only go in one way; if the cable isn't going in, try flipping it over. I am still not sure what is going on. Note: If you want to recover data from the "OLD" drive, don't do this! Asus Sata Configuration

I do not have the option to change ACHI to IDE. Appreciate you taking the time to help. Once I found you I was just a few minutes from nirvana! his comment is here Go into the Control Panel -> go under Administrative Tools -> Computer Management -> Storage -> Disk Management.

Windows will load your driver and you can now continue Windows Setup as normal. Asus Bios Not Detecting Hard Drive So for USB SSD, see the general USB troubleshooting guidelines in the Peripherals flowchart and for SCSI SSD see the SCSI flowchart. Reply Rodrigo says: March 15, 2014 at 05:08 I got home from work yesterday afnetroon and mowed the lawn and blew leaves before the rain came today.

Registration is free and the forums are specifically for tech issues such as yours.Thank you and I hope you get your issues resolved!Tyler ThompsonPCMechanic Editor-in-Chief[emailprotected] Reply steve scott on November 6,

Just don't fall for the malware that pretends to issue SMART. Reply HelpPleaSE!! Really appreciate your help!!! Hard Drive Shows In Device Manager But Not Disk Management Let's Begin Unpack everything.

If neither fix helps, try disconnecting the data cable to ensure that the drive isn't receiving some flaky power down signal from a bad ATA interface or a crazy power management I had to disable flash module and switch from AHCI to ATA on a Dell. then there is a option to disable sata,. weblink If it doesnt have jumpers or it's already configured as master then pop it back into the laptop and switch on.

Reply Sripal says: September 17, 2013 at 02:28 Thank You Xavier…It works for compaq presario Reply jain says: February 3, 2017 at 04:02 thanks a lot Mr. If your current hard drive is set as "Cable Select" (meaning it is the only drive on the channel), then you may need to change it to "Master" which will allow In Windows 9x/ME, it will appear, but you will need to right-click on the new drive and choose "Format" from the menu. Now, the C drive only has 550 mb on it & the "I" drive has 159 GB on it.

I pressed F2 In BIOS i cant find Onboard Devices no to talk of Flash Cache Module to Set Off and Onboard Devices -> SATA Operation -> Set ATA.